|Door Height||3 m - 5 m|
|Net Weight||180 kg, 280 kg|
|Voltage||110 V, 230 V|
|Frequency||50 Hz/60 Hz|
|Shaft Diameter||60 mm|
|Power||460 W - 750 W|
Rolling Shutter Operator is used in Rolling Shutters up to 200 sq feet. It can be operated by remote control and ordinary switch. During power fail, it allows to operate the rolling by hand.
|Door Height||3 m,4 m|
|Door Weight||75 kg,150 kg,250 kg|
|Motor Speed||7 - 9 rpm,12-14 rpm,12 - 17 rpm|
Central Motor is used in small size rolling shutters up to 100 sq feet. It removes traditional spring system. During power fail, hand crank or chain is used to open the door. Why tubular motors are preferred over heavy duty motors. The tubular motor is invisible. That is because it is fitted inside the pipe on which the shutter rolls. Tubular motors are not heavy duty motors, they are suitable for lightweight operation. Mainly designed for domestic use, where aesthetics and noiseless operation is a must. Auto-locking and all other features that are available for the heavy-duty motor are also available for the tubular motor.
|Door Capacity||300 kg, 400 kg, 1200 kg|
|Motor Speed||24 rpm|
Rolling Door Motor is used in heavy-duty rolling shutters up to 1500 sq feet. There is two type os side motors. they can operate with remote control and an electric switch. During power fail chains are used to open the door.
|Minimum Order Quantity||100 Square Feet|
|Length||4 m - 5 m|
|Available Material||PVC, Polycarbonate|